โSep-24-2019 09:40 AM
โOct-01-2019 01:01 PM
โOct-01-2019 10:19 AM
fj12ryder wrote:
I just wipe off what's left on there with a paper towel and reapply whatever kind of grease I have handy.
โOct-01-2019 06:57 AM
โOct-01-2019 04:40 AM
โSep-30-2019 07:37 AM
Cummins12V98 wrote:rav wrote:
https://www.bwtrailerhitches.com/sites/default/files/documents/2019%20Companion%20Owners%20Manual%20WEB.pdf
page 24
Thanks!
Have to say that's the first time I have seen that spec!!!
"As needed, grease the polyurethane bushings with multi-purpose grease"
I just sent them an email on this subject.
โSep-28-2019 06:28 PM
MFL wrote:Dave H M wrote:
his thread got me to thinking tat maybe I should service/lube my trusty Reese 15K.
Dayum, I had to use a brass drift and two pound hammer to knock the tilt pin out. So it is all taken care of now. hope it works with lube on it. :R
Dang Dave...forget about that hammer, just move on from that "trusty old Reese"!! Get a new Patriot 16K, drop it in your old rails, and enjoy the ease of use, including the ZERK!
I've read your post about being "older than dirt"! Why not spend a small bit of your fortune on a new/improved hitch? You can't take that money on your next journey, enjoy it now!:W
Jerry
โSep-28-2019 03:09 PM
Dave H M wrote:
his thread got me to thinking tat maybe I should service/lube my trusty Reese 15K.
Dayum, I had to use a brass drift and two pound hammer to knock the tilt pin out. So it is all taken care of now. hope it works with lube on it. :R
โSep-28-2019 12:49 PM
โSep-28-2019 12:02 PM
โSep-28-2019 09:02 AM
rav wrote:
https://www.bwtrailerhitches.com/sites/default/files/documents/2019%20Companion%20Owners%20Manual%20WEB.pdf
page 24
โSep-28-2019 03:30 AM
โSep-27-2019 09:55 AM
rav wrote:
I used the grease on the rubber mount, per the instructions I got with the hitch, other than that I did exactly as you suggested.
โSep-27-2019 04:00 AM
โSep-26-2019 07:18 AM