โOct-25-2015 05:09 PM
โOct-27-2015 01:40 PM
โOct-27-2015 01:13 PM
โOct-27-2015 10:43 AM
htowners wrote:
The solenoid needs to be drained completely. I disconnect both sides of the solenoid to drain any water out. I then hook up supply side, pressurize and jump the solenoid to open it allowing air through.
Back to the topic, I've not fully checked, but having to pull mine out earlier this year, it looks the same as a conventional ice maker, so if the day comes, I'll adapt a standard residential one.
I love having to never worry about ice, and it only takes slightly more room than a small bag of ice.
โOct-27-2015 09:35 AM
โOct-27-2015 04:32 AM
jerseyjim wrote:
BSINMICH: It is my understanding that the hoses to the ice maker simply have to be drained...it is the mechanism that pumps (feeds) the water that needs to be "winterized".
โOct-27-2015 03:52 AM
โOct-26-2015 02:05 PM
Executive wrote:
Look HERE
โOct-26-2015 07:09 AM
โOct-26-2015 02:39 AM
โOct-25-2015 09:36 PM
โOct-25-2015 08:37 PM
Passin Thru wrote:
Replace it but you can't coat it.Probably needs galvanizing.
โOct-25-2015 06:58 PM