โApr-19-2019 08:01 AM
โApr-22-2019 06:10 AM
โApr-21-2019 06:00 PM
routemaster wrote:
This is how I made mine hope it helps.
โApr-20-2019 07:58 PM
โApr-20-2019 11:13 AM
โApr-20-2019 10:39 AM
โApr-20-2019 10:33 AM
โApr-20-2019 08:56 AM
โApr-20-2019 08:37 AM
โApr-19-2019 07:05 PM
routemaster wrote:
This what I did to raise my E up 2ins also made a cross brace to help to stop sway.
โApr-19-2019 07:04 PM
Retired JSO wrote:
You will be way ahead of the game by cutting the hangers off and welding the square tubing to the frame. Then re install the hangers with a 1 1/2โ tube welded perpendicular to the frame from hanger to hanger. You accomplish the height issues along with the frame flex you will get when turning sharply.
โApr-19-2019 04:49 PM
โApr-19-2019 03:30 PM
โApr-19-2019 01:05 PM
dryfly wrote:
I can see issues with blocks if raised too high, or if blocks not of high quality. I would be hesitant to raise a trailer using the lower set of hanger holes without additional support.
โApr-19-2019 12:44 PM