โJun-21-2019 07:53 PM
โAug-14-2019 01:36 PM
โAug-14-2019 08:27 AM
AnEv942 wrote:Boatycall wrote:
.. with endcaps and a couple rolls of Dicor Butyl seal tape. I have the drawings from Eagle cap on the stud/cross brace spacing, so now to locate those and put the aluminum strips in.
Curious where you found end caps and what they look like.
โAug-14-2019 08:04 AM
Boatycall wrote:
.. with endcaps and a couple rolls of Dicor Butyl seal tape. I have the drawings from Eagle cap on the stud/cross brace spacing, so now to locate those and put the aluminum strips in.
โAug-13-2019 02:43 PM
โAug-12-2019 01:55 PM
โJun-29-2019 05:24 PM
โJun-29-2019 08:40 AM
Boatycall wrote:
....
I, Jim (aka Boatycall), now do the TC walk of shame.... I should have caught that sooner. I am no longer worthy of being on this forum... ๐ฎ
โJun-28-2019 07:50 PM
โJun-28-2019 06:59 PM
billyray50 wrote:
Sounds like your not far from ALP. Did Brad give you an option to bring it to factory and they could look at it and maybe fix it for you?
โJun-28-2019 06:48 PM
โJun-27-2019 12:09 PM
Glacier D wrote:
The Old Eagle Cap owners website had some pictures of a 1050 being built with a picture of the nose prior to the cap being glued on. Plenty of luan behind that cap. That 1050 was built around the same time as mine in late 2008, not sure how Adventure RV built them a couple years later.
โJun-27-2019 12:01 PM
โJun-27-2019 11:44 AM
โJun-27-2019 06:23 AM
wnjj wrote:
I thought the fiberglass nose was glued directly to the aluminum frame. It was done that way for the walls for sure. bighatnohorse had posted some pictures from the factory back in '08 (https://www.rv.net/forum/index.cfm/fuseaction/thread/tid/22030250) but they were linked to his old forum server.
Rich, if you still have these photos it may help a bunch:
20081016182818_front_cap_mold.jpg
20081016183131_frontcap_install.jpg
2008102281843_front_cap3.jpg
They were in http://www.eaglecapowners.com/campfire/upload/Admin-Rich.