I think this is more of a logistical concern. I believe the end product will be better at the stores but this will allow Funtown to do a PDI before it leaves the area and be sent to the dealer network with a minimal PDI upon delivery. This cuts costs...
I am just going by what I saw at the factory in 1998. I just watched as they picked a wall unit up and proceeded to adjoin the two. I did a lot of work on it but I never had a broken frame so didn't have to do what you are doing. From what I saw it w...
The nose section sits on the sturdy floor. The wall structure is one piece lifted into place. I would assume the nose section is bolted down to the floor since(in mine) the frame ran inside the wall(in the coach) and was covered in carpet. The floori...
They used a Sturdi wood floor that extended over the outriggers. The vacume bonded walls sat on the outside of this floor and was bolted through. The walls were connected with the vacume bonded roof. If the frame has been fixed the only logical concl...
As a few others have said if it is just a puncture I would fill the hole with a good polyurethane and let it dry. Eternabond it and squirt dicor around the edges and leave it. Those trailers have a 1/2" deck. I don't believe a puncture would warrant ...
