cancel
Showing results forย 
Search instead forย 
Did you mean:ย 

Worn inside Tires

JKwock
Explorer
Explorer
Verify my suspicions. I have worn tires on the rear axle tires on the inside. Very worn to a point I saw steel showing. The other tires are fine. Im guessing I don't have enough camber on the rear axle? What do you guys think?

Jason
13 REPLIES 13

allen8106
Explorer
Explorer
JKwock wrote:
Verify my suspicions. I have worn tires on the rear axle tires on the inside. Very worn to a point I saw steel showing. The other tires are fine. Im guessing I don't have enough camber on the rear axle? What do you guys think?

Jason


You need an alignment.

I get mine aligned every two years as part of my regular maintenance.
2010 Eagle Super Lite 315RLDS
2018 GMC Sierra 3500HD 6.6L Duramax

2010 Nights 45
2011 Nights 70
2012 Nights 144
2013 Nights 46
2014 Nights 49
2015 Nights 57
2016 Nights 73
2017 Nights 40
2018 Nights 56
2019 Nights 76
2020 Nights 68

Njmurvin
Explorer
Explorer
I had mine aligned after uneven wear following a long trip over I5 from Oregon to L.A. I took it to an axle specialist. Total bill was $325 for both axles. No problem since.
2020 Chevy Silverado 3500HD Duramax 4x4 Crew Cab Standard box

2011 Arctic Fox 27.5L

Edd505
Explorer
Explorer
Might check wheel bearing and see if they are loose.
2015 F350 FX4 SRW 6.7 Crew, longbed - 2017 Durango Gold 353RKT
2006 F350 SRW 6.0 crew longbed sold
2000 F250 SRW 7.3 extended longbed airbags sold
2001 Western Star 4900EX sold
Jayco Eagle 30.5BHLT sold, Layton 24.5LT sold

lenr
Explorer II
Explorer II
Our fifth wheel came with 5100 lb axles--loaded with our normal personal possessions and fresh water, the two axles weigh 10,220 lbs. So, they were loaded right up to the limit and probably ready to bend at the slightest abuse. We upgraded to 6,000 lb axles and disc brakes. OP might want to consider upgrading to a heavier wall tube. Dexter makes 3 wall thicknesses of 3" axle tubes ranging from 5100 to 7000 lb axles. RV manufacturers are going to use the cheapest, thinnest, axle tubes rated for what they're building.

JKwock
Explorer
Explorer
Thanks for all the input. I will get two new tires for sure and then get the axles checked out. Weird how its only the rear axle tires.

Jason

cummins2014
Explorer
Explorer
JKwock wrote:
Verify my suspicions. I have worn tires on the rear axle tires on the inside. Very worn to a point I saw steel showing. The other tires are fine. Im guessing I don't have enough camber on the rear axle? What do you guys think?

Jason



Friends new Montana fifth did the same on two tires, axle alignment . took it to Alignment Specialists in Salt lake , great place for RV's trucks etc. He has had no more problems with his tires, its been a few years now.

RoyF
Explorer
Explorer
Like RAS43, I had axles straightened with good results. Can't remember how long ago, so it has been several years.

I live on a dead end street and used to turn the fiver around by backing into a vacant lot, and that involved backing over the curb. After getting the axles straightened I stopped bringing the fiver home for pre-trip loading. Tires are now wearing evenly, so I have reason to believe that backing over a curb (not once but several times) was the cause of the problem.

freetime58
Explorer
Explorer
2oldman wrote:
JKwock wrote:
I have a guy who bends the axle to the correct camber. He said the axle straightened because I overloaded my 5er? I have never overloaded my 5er?
I got the same pitch from a mobile mechanic out of Twin Falls ID. I fell for it, but I think I got ripped off. It was my tires.


So.......4 tires, 2nd axle has issues but 1st axle ok.........you think it's tires??? LOL Might have been tires in your case (you don't mention any particulars) so no idea on your circumstances. However, in the OP's case, all things being equal, it seems as though something is different between the first and second axle........I'm betting on nose high, improper loading, overloading or bent axle.

2oldman
Explorer
Explorer
JKwock wrote:
I have a guy who bends the axle to the correct camber. He said the axle straightened because I overloaded my 5er? I have never overloaded my 5er?
I got the same pitch from a mobile mechanic out of Twin Falls ID. I fell for it, but I think I got ripped off. It was my tires.
"If I'm wearing long pants, I'm too far north" - 2oldman

RAS43
Explorer III
Explorer III
opnspaces wrote:
Yes not enough camber. Unfortunately this is probably from a bent axle. You may find a truck shop for big rigs to straighten it. But it would probably be cheaper to just replace the axle.


I had my axles bent and aligned by a commercial truck/trailer repair shop about 7 years ago. The cost was $200. Alignment is still good today. Replacing the axle may be more and an alignment might still be needed.

MFL
Nomad II
Nomad II
Are you towing nose high, or loading your rig in a manner to put extra weight on the rear axle? You don't say what FW you have, but some units have axles just barely adequate if wt is spread evenly.

Jerry

JKwock
Explorer
Explorer
I have a guy who bends the axle to the correct camber. He said the axle straightened because I overloaded my 5er? I have never overloaded my 5er?

Jason

opnspaces
Navigator
Navigator
Yes not enough camber. Unfortunately this is probably from a bent axle. You may find a truck shop for big rigs to straighten it. But it would probably be cheaper to just replace the axle.
.
2001 Suburban 4x4. 6.0L, 4.10 3/4 ton **** 2005 Jayco Jay Flight 27BH **** 1986 Coleman Columbia Popup