The post for the RV table when placed in the bed position are too short I used 3" PVC pipe and formed the ends to fit by heating them with a heat gun till soft and pressing the ends into the post holes.
Below is a clip I made from PVC pipe as well for mounting under table
Below is a clip I made from PVC pipe as well for mounting under table
When I put this table in the bed position it will easily fall off when you sit or lay toward the edge of the bed. The post shouldn't be necessary but in my case it is
The table is shaped like this.
And sits on these
The table is shaped like this.
And sits on these
This is a really great idea. Our wrap around dinette makes a 3/4 bed that is 84 inches long. It easily sleeps two adults... often. We have a larger than normal table surface and I do worry about it cracking when company gets out of bed sits on the edge of the "bed".
This would be an easy fix.
This would be an easy fix.
