Best way to repair a hole in hauler vinyl floor

[Rockinfigs]

So I have a bin I carry wood in that I tie down to my rzr in my hauler. I place a floor mat underneath it but during my travel the mat came out n the bin rubbed the vinyl floor ripping a hole approx 1 1/2 in diameter.. What's the best way to repair the hole.. The floor underneath is not damaged.. Just the vinyl ripped n left a hole. Thks in advance

[eDUBz]

You can go to Lowe’s or Home Depot and get that 5 minute epoxy 2 part tube

[Dennis58]

Duct Tape.

[jdc1]

Rockinfigs wrote:
Is there any particular epoxy I can just squeeze in there n flattened it out

https://www.homedepot.com/p/Henry-430-1-Gal-ClearPro-VCT-Adhesive-12098/205716714

[Home_Skillet]

Install one of these over the bad spot.
Tie down loop

[SDcampowneroper]

if you can find the same vinyl, tape a piece over rhe damaged area pattern matched , then cut thru both layers with a razor knife to make a patch. Remove the damaged area, glue down the patch. Flooring stores have products to blend in seams, make a parch disappear.
You shouldnt transport firewood, unless its kiln dried. Might move a disease

[Rockinfigs]

Is there any particular epoxy I can just squeeze in there n flattened it out

[SAR_Tracker]

Go under the sofa, or inside a closet, or some other "hidden" area (I've got a cabinet under the fridge, so I'd go there), and steal a piece of vinyl to fit, then glue in place.