| |
Subject |
Author |
Date Posted |
Forum
|
 |
RE: Exterior Stairs
laknox:
To expensive compared to other brands. As I stated I tried some modified repairs to my old steps and they are holding just fine. Hope it continues. I can think of other things I can do with $700 than a flight of accordion stairs. Perhaps, the price will come down later, or another brand will allow me to purchase at a "reasonable" price.
"Reasonable" price is in the eye of the beholder I think. Went to the local RV show this weekend. Almost all of the units had the one piece design steps. While they where solid feeling they also we more narrow then the Glowsteps. I am not a fan of the price of the Glowsteps either. After much debate with myself, I finally let go of the money but didn't tell the wife how much I spent. She was very happy with the Glowsteps and while she didn't like the price either, she says she is glad I bought them. Should the OP'er decide to buy them I don't think they will regret that purchase in the long run. Good luck.
|
shadows4
|
03/06/23 02:21pm |
Fifth-Wheels
|
|
RE: Bicycles
We mounted a front hitch to our F350. Put both of our bikes on there. You can clearly see them and the view of the road isn't obstructed. We use a bike rack that the bikes rest on their wheels and not hanging. It works very well for us. Only drawback is that they do catch a few bugs.https://i.imgur.com/y5Ypb7Ml.jpg]https://i.imgur.com/y5Ypb7Ml.jpg
|
shadows4
|
02/17/23 08:25pm |
Fifth-Wheels
|
|
RE: Exterior Stairs
Another GlowStep satisfied customer here. Hands down the best mod I have done to our 5er. Couldn't have been easier to install, 4 bolts and done. I have had both knees replaced and going from a 3 step to a 4 step made all the difference in the world to me. Good luck.
|
shadows4
|
02/15/23 10:30am |
Fifth-Wheels
|
|
RE: Eternabond over Dicor on PVC roof
Eterna Bond makes a cleaner for use with their tape. Just Google it. Good luck on your project.
|
shadows4
|
10/07/22 09:34am |
Fifth-Wheels
|
|
RE: Roof tear along edge ...
No need to remove the molding. Just use the Eterna bond tape up to the edge of the molding. First remove as much of the Dicor as you can. Install your Eterna bond and cover edges with fresh Dicor. You should be good to go. Good luck.
|
shadows4
|
10/01/22 09:29pm |
Fifth-Wheels
|
|
RE: Truck Scalping
Just an FYI for people wanting to order a new truck. I had a co-worker that ordered a new F350 with the gas 7.3 on December 31 last year. He just got it last week. Wow!!!
|
shadows4
|
09/16/22 04:06pm |
Tow Vehicles
|
|
RE: Rec Pro ???
We bought the love seat recliners this spring. Fast shipping and good communication from Rec Pro. We shall see how long they last.
|
shadows4
|
09/06/22 05:08pm |
Fifth-Wheels
|
|
RE: Solitude leaning to one side.
I just replaced mine on my 2019 Momentum.
Mind sharing what shop you took your trailer to? Thinking about changing mine out and not sure where to go besides Croft.
|
shadows4
|
09/06/22 04:57pm |
Fifth-Wheels
|
 |
RE: Trailer sway milestone 377mb
And the truck is handling weird unloaded.
I would start here. Off hand, I think you should have kept the F350 but I am biased.
|
shadows4
|
09/06/22 04:48pm |
Fifth-Wheels
|
|
RE: B&W fail or Operator Error?
OP'er here. My buddy and I have discussed this over and over and even he says it had to be operator error. And what is really amazing to me is the estimate to repair the truck, over $5400!!!! Wow, just wow.
|
shadows4
|
09/06/22 03:30pm |
Fifth-Wheels
|
|
B&W fail or Operator Error?
Not my truck, trailer or hitch. Buddy of mine had this happen to him a couple of weeks ago. Said he did a pull test, all was good. When he pulled out of the campsite it disconnected. I do not have anymore pics than what are shown here. I think he must have missed the second hole when he pinned it. He has had this setup for about 4 years without a problem. He did hook it back up and drove 3 1/2 hrs to the next campground. What are your thoughts?
https://i.imgur.com/Pe84l3Ml.jpg
https://i.imgur.com/8LGP9kRl.jpg
|
shadows4
|
08/26/22 11:55am |
Fifth-Wheels
|
|
RE: Water pump woes UPDATED!!!!
SUCCESS!!!!
I did find the air leak. I went to the hardware store and bought a fitting to plug into the end of the hose from the water tank. I then attached my blow out plug that I use for winterizing and applied 20psi of air pressure. I'll be darned if the leak was where I thought it was. In the last pic above it was behind the little block of wood.
So all in all I have $70 in a new water pump (thought originally that was the problem), and $80 in pex tools and clamps. I think it would have cost me more than $150 if I had to take it to a dealer. Thanks for all the replies and suggestions. You all are awesome!! Thanks again.
This is how I hooked up the air from my little compressor.
https://i.imgur.com/y077pGcl.jpg
The short red section of hose is where the leak was. That is the new piece in the picture.
https://i.imgur.com/OSSZNzYl.jpg
|
shadows4
|
08/25/22 05:56pm |
Tech Issues
|
|
RE: Water pump woes UPDATED!!!!
OP'er here. I checked and no o-ring in the cap for the winterization port. I found one in my plumbing stash and installed it. I have the hose from the water tank disconnected and stuck into a bucket of water. The pump sucks the water out of the bucket just fine and the pump will build pressure and shut off just fine.
When I open the bathroom sink faucet it runs good for a few minutes then will start spitting again. It's not as bad as before the o-ring but it still spits. I have ordered a set of pex plumbing tools and will start replacing sections of the manifold. I am at a loss so that is my only recourse that I can see. Thanks to everyone who has responded. The encouragement is definitely a help.
Here is some pics of my water setup. All the fittings appear to be tight except one. It is behind that block of wood. I will replace the pipe and the clamps when my pex tools come in. Again thanks.
https://i.imgur.com/GLbqBuVl.jpg
https://i.imgur.com/irGWonul.jpg
https://i.imgur.com/Mu7ckCAl.jpg
|
shadows4
|
08/23/22 02:06pm |
Tech Issues
|
|
RE: Water pump woes UPDATED!!!!
wa8yxm I had thought of that and checked if the cap was tight. Is there supposed to be a gasket in that cap? Thanks
midnightsadie I had thought of that too but the pump works as it is supposed to when I attach a hose and stick it in a bucket. When I do that the strainer is still attached.
What really puzzles me is there is no water dripping anywhere I can find. I would think if it was sucking air it would leak also.
|
shadows4
|
08/22/22 06:26pm |
Tech Issues
|
|
Water pump woes UPDATED!!!!
I need help!!! They say that's the first step admitting you need help. LOL
Okay here are the details. Trailer is a 2015 and has been flawless for the 2 years we have owned it. Last month we were camping without a water hookup. Ran out of water and refilled no problem. Ran out again a few days later and tried filling from the winterization port. Got the water into the tank but when using it started sputtering and spitting like it was still out of water or sucking air. Ended up blowing air into the inlet line and it started working!
We went out this week when we ran out of water the same thing happened. This time blowing air into the inlet line didn't do any good. I removed the inlet line again and attached a hose and stuck it in a bucket. Water pump works as it is supposed to. Replaced the inlet line and then removed the line going into the water tank and put the line into a bucket. Still spitting air. I am at a loss as what to do next.
I am hesitant to start removing pex fittings but will if I have to. Is there a way to pressurize the system to check for a leak? I haven't seen any water leaking anywhere. Some times the pump will pressurize and shut off other times it just runs.
Any suggestions are welcome. I don't want to take it to the dealer. Thanks.
|
shadows4
|
08/22/22 05:45pm |
Tech Issues
|
|
RE: Cedar Creek rear cap cracks
Curious as to what the OP'er did to fix the problem?
|
shadows4
|
07/16/22 10:24am |
Fifth-Wheels
|
|
RE: Rec Pro RV furniture
OP'er here. We ended up going with the RecPro manual reclining love seat. So far very happy with our purchase. Seems to be a good value for the money.
https://i.imgur.com/59hMYUgl.jpg
|
shadows4
|
07/08/22 07:13pm |
Fifth-Wheels
|
|
RE: How to increase payload?
I did some more research. According to E-trailer the only difference in the 5200 lb axle and the 6000 lb axle is a bend in the axle. Same bearings, brakes and axle tubes. I have upgraded the tires to E rated Goodyear Endurance tires.
I have put off weighing the trailer, I am afraid of what I will find. But this spring after we dewinterize and get it loaded for the season I will get that done. And look into adding a leaf to the springs. Thanks for all the replies.
|
shadows4
|
03/28/22 06:36am |
Fifth-Wheels
|
|
How to increase payload?
I have a 2015 Coachmen 324 TSRK, it has a dismal 1284 lbs of payload. It has 5200 lb axles. It was one of only two models produced by Coachmen that year that 7000 lb axles were not an available option. I know I cannot change the rating on the yellow payload sticker. But what would be the harm in changing the axles, springs, brakes with 7000 lb axles, springs and brakes? Would I be safely increasing my payload? What about just changing the bearings to 6000 lb bearings? It it my understanding the only difference between the 5200 and 6000 lb axles is the outer bearing? Thanks in advance.
|
shadows4
|
03/27/22 03:15pm |
Fifth-Wheels
|
