Trailer Life Magazine Open Roads Forum: Search
Open Roads Forum Already a member? Login here.   If not, Register Today!  |  Help

Newest  |  Active  |  Popular  |  RVing FAQ Forum Rules  |  Forum Posting Help and Support  |  Contact  



Open Roads Forum  >  Search the Forums

 > Your search for posts made by 'enblethen' found 1076 matches.

Sort by:    Search within results:
Page of 54  
Next
  Subject Author Date Posted Forum
RE: Yellowstone - Spring or Fall?

I don't think you wuld save that much time staying at Fishing Bridge. Best locale for saving time is Madison. No hookups!
enblethen 09/22/19 08:13pm RV Parks, Campgrounds and Attractions
RE: travel to Haines Alaska

Here is link to BC weather Well above freezing so only appears to be rainy!
enblethen 09/22/19 01:12pm RVing in Canada and Alaska
RE: Yellowstone - Spring or Fall?

We like them both. Spring is good for the babies especially the Bison. Fall is great for the Bison migration, the elk bugling event and fall colors.
enblethen 09/21/19 09:40pm RV Parks, Campgrounds and Attractions
RE: Guide for camping at Corps of Engineers CG

"Camping with the Corp" is what we use. Camping with the Corp, Amazon
enblethen 09/19/19 09:24pm RV Parks, Campgrounds and Attractions
RE: Michelin kaboom!

From Mechlin website: Michelin Keep five years in mind After five years or more in use, your tires should be thoroughly inspected at least once per year by a professional. My rig came with Michelins. They rotted long before five years from the inside out. Strings were showing that wicked water to the interior of tire. Dealer gave me credit for the tire, I changed them all out. Two others showed problems inside when removed from the rim. Yes, this was sometime ago. Never had Michelins again.
enblethen 09/19/19 06:48pm Class C Motorhomes
RE: Route from Astoria, OR to Wenatchee, WA

US 12 has some narrow portions. It is far the most scenic route. The narrow crooked portion is on the east side. West side is a good highway.
enblethen 09/19/19 09:30am Roads and Routes
RE: Overtight weight distribution brackets bent frame....

Top of frame distorting is from the upward angle of the bracket bolts.
enblethen 09/18/19 01:53pm Towing
RE: Dometic fridge not cooling on electric

Check resistance of element as suggested by Chris then check for 120 volt output at circut board. Verify 120 volt receptacle where refer is plugged in.
enblethen 09/18/19 08:04am Family Camping
RE: Smell and heat from rear wheel wells

I would look for a wiring harness close to the exhaust. Look at inside of the rear wheels for signs of a fluid leak.
enblethen 09/17/19 03:37pm Class C Motorhomes
RE: Overtight weight distribution brackets bent frame....

You could add a section of flat stock 15-24 inches long 3/8 inch thick to reinforce the frame and not even weld it on. Could use a couple of bolts to hold in place. Yes, welding it on would be ultimate solution. Need a good welder so as not to blow through stock frame.
enblethen 09/17/19 02:29pm Towing
RE: Lippert ground clearance issue

I would take some close measurements. Then decide whether to "adjust" them. Make and model of leveling system would be beneficial. Maybe there is not sufficient travel to raise them!
enblethen 09/17/19 01:31pm Fifth-Wheels
RE: height adjustment

Is the trailer sitting level when loaded for the road? What pin box is the trailer equipped with? Waht hitch is installed on the truck? How much des the truck sink when trailer is connected and loaded for the road?
enblethen 09/17/19 10:35am Fifth-Wheels
RE: hydraulic leveling jack replace / rebuild

The HWH service manual for the Joystick-controlled 200/210 says to "take the hose loose at the jack, if it doesn't retract, replace the cylinder. If it does retract, loosen the hose for that jack at the valve. If the jack retracts, replace the valve. If the jack does not retract, the problem is the hose." If it is the jack, you can replace just the cylinder and not the complete jack.
enblethen 09/17/19 10:24am Class A Motorhomes
RE: hydraulic leveling jack replace / rebuild

Sounds like you have HWH jacks, is that correct? It would not be jack issue but the control valves. HWH has some good troublshooting on website. HWH You will need some more information as to which control and which style, kickdown or straight acting. Control valves can be disassembled and cleaned. I have manual at home. Be home late tomorrow.
enblethen 09/15/19 05:57pm Class A Motorhomes
RE: Onan Genset won't stay running fixed

Slip Stick works!
enblethen 09/14/19 07:39am Tech Issues
RE: incandescent bulb works correctly LED does not

What series incandescent are you replacing? What LED lamp is going in? Look in socket to see how many pins in base. (small solder dimples) Sounds like the incorrect lamp.
enblethen 09/12/19 07:29pm Tech Issues
RE: 6 Volt RV batteries

Here is more onSam's club closings
enblethen 09/11/19 09:01pm Tech Issues
RE: 6 Volt RV batteries

Many of the Sam'sClubs are closing. They are becoming full filment centers.
enblethen 09/11/19 07:44pm Tech Issues
RE: Norcold Fridge Issue - Help!

Did you happen to test your old element for resistance? Sounds like it is the circuit board
enblethen 09/11/19 07:39pm Tech Issues
RE: 6 Volt RV batteries

I got my batteries about 3 years ago.
enblethen 09/10/19 08:12pm Tech Issues
Sort by:    Search within results:
Page of 54  
Next


New posts No new posts
Closed, new posts Closed, no new posts
Moved, new posts Moved, no new posts

Adjust text size:

© 2019 CWI, Inc. © 2019 Good Sam Enterprises, LLC. All Rights Reserved. | Terms of Use | PRIVACY POLICY | YOUR PRIVACY RIGHTS