My Norcold 6162 will run on ac and will light on lp until igniter quits sparking, then the flame goes out. I have removed burner orifice, cleaned very carefully, cleaned igniter. Has a pretty blue flame in the center of heat tube until igniter quits ...
Again, thank you all for your willingness to help. I had watched a video that showed the igniter staying red out on the end while the burner was on. I got to wondering if mine was not getting hot enough to send the signal back to the board so I used ...
dougrainer wrote:It is very rare for a Ignitor and board to fail. The most common cause is the very inexpensive Spark electrode/wire. If any part of the spark electrode ceramic "leaks"(hairline cracks you have difficulty seeing) the return voltage to...
