Hey folks, My knowledge on these matters is marginal at best so I am hoping someone here might have some suggestions regarding this issue I encountered today. I went to test my shiny new Surge Guard 34930 with my 3200 watt inverter genny (using a Sur...
Hey folks, I am hoping to get some suggestions from you experts on bringing a travel trailer onto our property. We are in the market for a small couples camper (25' or less) and while we intend to travel with it, we also plan to use it regularly on o...
Hey folks, First post here after doing a ton of lurking and reading including the FAQs. Very helpful but I am looking for some specific input please. We have been researching various trailers and motorhomes and have come to the conclusion that a shor...
road-runner wrote:I've discovered the secret factory wiring instructions for these generators:"Hook up the wires any way you want to get power between the hot and neutral connections on every power outlet. If there are any wire ends left over, just ...
wnjj wrote:Use ohms with the generator off and bonding plug out to see if the ground pins are connected between the receptacles and the ground bolt on the right.Since your EMS used to say hot/neutral swapped when bonded, I suspect it’ll be fine now i...
Bobbo wrote:If your EMS is not saying "open ground" then it is detecting 120v between hot and ground. Since it is detecting 120v between hot and ground, your outlets should all have 120v between hot and ground. If they do not, you have a deeper probl...
wnjj wrote:TheHound wrote:wnjj wrote:Looks great. Hopefully there's enough slack to do that.Your sir are a ***bleeping*** genius lol! SUCCESS!This has been quite the learning process and I thank everyone that has piped in so far But one more quest...
wnjj wrote:Looks great. Hopefully there's enough slack to do that.Your sir are a ***bleeping*** genius lol! SUCCESS!This has been quite the learning process and I thank everyone that has piped in so far But one more question, sorry. I noticed now ...
